Pairing the Bluetooth Reader with the Tablet:
In order to pair the Ingenico Bluetooth reader with your Android device, ensure that both the reader and tablet are powered on. The reader will have a battery icon in the upper right-hand corner of the screen, which indicates both the charge of the battery and if the battery is charging or not.
From Android Settings under the Connections section of your tablet, ensure that Bluetooth is Enabled (pictured below) on the left hand side of the screen.
If Bluetooth is not enabled, enable Bluetooth for the device.
When Bluetooth is enabled and the reader is powered on, your tablet will Scan for available Bluetooth devices with which to pair.
The Ingenico reader will appear on the list followed with the prefix iCM122- followed by the last eight digits of the device serial number (identified as Serial No on the back of the device). For this example, this number is iCM122-20552710.
Select your reader from the list of available devices to pair.
Before pairing, the reader should display "BT Pairing Required." Tap the F four (4) times, and after the reader beeps twice, tap the F2 button. This will initiate a Standard pairing, as seen below:
Note that the prefix of the number as displayed on the reader is different as that displayed on the Android device - only the last eight digits are identical.
At this stage, you should enter the PIN as given above into your Android device:
If the PIN was entered correctly, the device name will now appear on the right-hand side of the screen under Paired Devices.
Please note: If, for any reason, the reader has become un-paired from the device, a new pairing with a new PIN number will need to be initiated from the reader.
Toast Device Setup
Now that the reader and tablet are paired together via Bluetooth, the Toast POS app must be properly enabled to use the reader with Toast. From the main Toast menu, find and select Device Setup.
Under the Payment Processing section, select Card Reader Model from the list to choose which reader model to use with this device. Ensure that Ingenico ICM122(Bluetooth) is selected as the card reader model:
Once selected, tap anywhere outside the Card Reader Model box to exit and then use the Toast icon in the top-left to leave Device Setup and return to the Main Menu.